Innovative civil engineering solutions for Asia Pacific

 In Quic-logue

Quicseal Construction Chemicals is set to enter the civil engineering market through its exclusive partnership with Bluey Technologies.

Quicseal Construction Chemicals, headquartered in Singapore, is set to enter the civil engineering market through its exclusive partnership with Bluey Technologies – an Australia-based supplier of construction products for major civil engineering infrastructure works. Since 2017, Bluey has appointed Quicseal as its sole distributor for the Asia Pacific region.

Among the products that Quicseal will offer to the region is the BluCem range, an innovative solution in highly flowable and volumetrically stable cements, grouts and mortars. This range of products can be used for applications ranging from filling ducts around post tensioned cables, lightning trenches, floor levelling or even encapsulation of ground anchors to spray and trowel applied mortars and pumpable or fast setting grouts. BluCem is fast setting with high early-strength development. As such, it is suitable for construction of roads, airports, tidal structures or associated infrastructure with limited time frames, which normally require fast setting grouts that can achieve 20 MPa in two hours. BluCem is also fully shrinkage compensated. Special cement systems, blended aggregates and advanced additives are used to form micro concrete that is C Class dual shrinkage compensated, and chloride free. In addition, many high-performance grouts get very hot when curing, which can lead to damaging shrinkage immediately after casting and curing resulting in cracks and poor strength. BluCem has products that allow deep pour situations of more than 100 mm with low exothermic heat created, resulting in a positive outcome. BluCem also has products that are suitable for challenging environments that require special sulphate and chloride resistant cements to ensure repairs can be undertaken successfully.

BluCem HE80AG is a pourable, fast setting product suitable for civil engineering applications. It incorporates special cement systems, blended aggregates and advanced additives to form micro concrete that is C Class dual shrinkage-compensated, and chloride free. The addition of aggregate allows the product to be batch mixed in agitators for large volume applications, such as road and runway repairs including airport lighting trench. BluCem HE80AG has been used on some of Australia’s largest and most important infrastructure projects where time is a critical factor. BluCem HB50 is a trowellable, highly durable product also suitable for civil engineering applications. It incorporates marine grade cement systems and advanced polymer additives to form a cementitious mortar that is chloride and sulphate resistant, C Class dual shrinkage compensated and potable water use approved. It provides fast-setting times and high chemical resistance to ensure repairs can be undertaken within tidal zones and other applications requiring fast return to service. BluCem HB50 is considered an ideal high-performance repair mortar where engineers require a positive outcome in the most difficult application environments.

BluCem FSC is a highly durable, CSA-based cementitious powder binder, which is blended with aggregates to form a high early strength gain concrete. It is specifically designed to be applied using volumetric based continuous mixers. The powder blend has been formulated to eliminate segregation during transport and provide consistent, repeatable results throughout large volume applications. BluCem FSC is designed for use in construction of concrete structures and pavements where only a short window of time is available to complete the works and return the asset to service.

BluCem HE80AG is a pourable, fast setting product suitable for civil engineering applications, such as road and runway repairs including airport lighting trench. The product has been used on some of Australia’s largest and most important infrastructure projects where time is a critical factor.

BluCem FSC is a highly durable, CSA-based cementitious powder binder, which is blended with aggregates to form a high early strength gain concrete. It is designed for use in construction of concrete structures and pavements where only a short window of time is available to complete the works and return the asset to service.

Start typing and press Enter to search